Carpet tilecan be installed in the office without the use of a specialist. However, if you start installing without knowing how to lay it or preparing it in advance, the size may not match or you may end up with an odd design.
In this article, we will discussCarpet tileI will explain how to lay it out. It can also be used as office flooring material.Carpet tileWe will introduce why we recommend it, design examples, and tips on how to lay it, so please use it as a reference.
Carpet tilebefore placing
Carpet tileWe will explain what you need to prepare before placing it and how to calculate the required number.
What to prepare
Carpet tileThe following items are required for installation:
- Carpet tileitself
- Adhesive/double-sided tape
- cutter
- roller
- pencil/thread
- major
- Hera
- work gloves
- mask
These are usually available at home improvement stores.
How to calculate the required number
Carpet tileThe required number of sheets is ``floor area of the room / Carpet tileIt is calculated by the area of 1 sheet. For example, if the floor area of the room is 10 m2,Carpet tileIf the dimensions of each sheet are 50 cm x 50 cm (0.25 m2), the required number of sheets is 40 sheets.
However, this calculation method does not always guarantee the required number of sheets. The number may vary depending on the design and shape of the room.
basicCarpet tileHow to lay/arrange
From hereCarpet tileI will show you how to lay and arrange them. The basic flow is as follows.
- Check the size of the room with a tape measure
- Apply bondo
- Carpet tilePaste the
- Treat the wall
Check the size of the room with a tape measure
First, use a tape measure to accurately measure the length and width of the room. Next, mark the vertical and horizontal centers and connect them with the center points in the facing direction with a line. If the room is square, draw a line so that it looks like the kanji ``田'' when viewed from above.
Once you know the size of your room,Carpet tileYou can calculate the number of sheets. When measuring, consider the shape and unevenness of the room to get an accurate idea of the floor area.
Apply bondo
Apply bond to each block of the floor divided into four parts. It's easy to just transfer the adhesive to the tray and use a roller to apply it evenly.
Leave the wall area open without painting it. When the bond changes from white to transparentCarpet tileI will paste it.
Carpet tilePaste the
Carpet tileWhen pasting, it is important to make sure that it is in close contact with the adhesive and that there are no gaps. Check that it is not distorted or the paste is loose, andCarpet tilewill be placed in the same way.
If necessary, cut the tiles while placing them to fit along walls or to fit special shapes.
Treat the wall
placed along the wallCarpet tilemust be trimmed to fit the shape of the room. When using a corner cutter,Carpet tileYou can cut by simply pressing it against the wall and sliding it.
If you use a regular cutter,Carpet tileMark it and cut along the line. NowCarpet tileThe installation process is complete.
to the officeCarpet tileWhy is it recommended?
Carpet tileThe benefits go beyond simple installation. It has many other benefits as well, making it a great choice for office flooring.
here in the officeCarpet tileHere are three reasons why we recommend it.
Can reduce noise
Carpet tilehelps reduce noise. This is because it has a higher sound absorption effect than other flooring materials.
Offices generate a variety of noises, such as conversations between employees, the sound of telephone calls, and footsteps. During business negotiations or meetings where silence is required, even the slightest noise can disrupt your concentration.
Carpet tileabsorbs conversation sounds and light floor impact sounds (such as footsteps such as the flapping of slippers), making it possible to create a comfortable working environment.
Reduce the amount of dust
Carpet tileYou can also expect dust resistance. This is because carpet pile has a property called the "dust pocket effect" that envelops dust. According to a study by the Japan Carpet Industry Association, the amount of house dust thrown up by carpeting is 1/10th that of flooring.
Reference: Japan Carpet Industry Association | Carpet reduces house dust by one-tenth. Joint research with Shinshu University and Osaka Prefectural Institute of Industrial Science and TechnologyHouse dust can cause allergic symptoms.Carpet tileBy setting up a system, you can also protect the health of your employees.
However, regular cleaning is required. Remove dirt and dust with a vacuum cleaner on a daily basis, and thoroughly clean it with detergent once every six months.
Easy to clean and replace
It is also easy to clean and reupholster.Carpet tileThis is a feature of For example, in the case of rolled carpet, everything must be removed in order to be cleaned.
On the other hand,Carpet tileYou can clean only the dirty parts by peeling them off. You don't have to replace everything even if it gets too dirty or damaged and needs to be replaced. Furthermore, since it can be easily removed, it can be easily restored to its original state when relocating the office.
Carpet tileDesign and layout examples
Carpet tilehas various designs. The main methods of pasting are as follows.
- Nagashi (sequential) pasting
- Checkered pasting
- random pasting
- Brick pasting
- Ashura pasting
Nagashi (sequential) pasting
“Nagashi (junmoku) pasting” isCarpet tileThis is a method of pasting in a certain order or direction. All tiles are placed in the same orientation, resulting in a uniformly designed office.
By laying the tiles without any gaps, the joints will be difficult to see and you can create a finish that resembles a single piece of carpet. If you want your office to have a classic, formal design, sinking is a good option.
Checkered pasting
"Checkered layout" is a layout in which tiles are arranged alternately rotated 90 degrees. Generally,Carpet tileWe recommend using a checkered pattern so that the seams are less noticeable.
Adjacent carpet tiles are oriented differently, creating a checkerboard-like pattern.
random pasting
"Random pasting" isCarpet tileThis is a method of arranging them in an irregular pattern. Even beginners can easily install it, as there is no need to think about direction or color and they can be placed freely.
Also, when replacing parts or peeling off theCarpet tileIt also has the advantage of being easy to maintain, since you can reinstall it without worrying about the orientation when washing it.
Brick pasting
"Brick laying" is a method of arranging tiles without matching the four corners, and is sometimes called "brick laying." Adjacent tiles are staggered, forming a brick-like design.
Brick pasting is used when pasting vertical tiles.
Ashura pasting
"Assurer pasting" is a method of placing tiles 10 to 25 cm apart from other tiles without matching the joints. By shifting it, the seams become difficult to see, making it look like a rolled carpet.
Same as brick pasting, it is used when pasting rectangular tiles.
Carpet tileKey points on how to lay
Carpet tileAlthough it can be installed without the help of a contractor, if it is done by a novice, it may become misaligned or look unsightly. To avoid such situations, please keep the following points in mind.
- Clean before laying
- Paste from the center of the room
- Use a cutter when cutting
- Lay it out so there are no gaps
- Press firmly from above
Clean before laying
Before laying the carpet, use a vacuum cleaner or floor wipe to remove dust and dirt. If the floor is dirty,Carpet tileThe suction power of the product will be weakened.
Also,Carpet tileYou will place various office supplies such as desks, chairs, copy machines, equipment, etc. on top. If you need to clean the floor, you will have to put all of this away. To save yourself a lot of time and effort, clean it first.
Paste from the center of the room
Carpet tilePlace it from the center of the room. This will allow you to stick it in a well-balanced manner.
Measure the sides of the room in advance and draw a line from the middle of the four directions toward the center to find the center part.
Use a cutter when cutting
Carpet tileWhen cutting, a cutter is recommended rather than scissors. This is because cutting with scissors often results in uneven cross sections.
Depending on the material and thickness, it may be possible to cut it with scissors, but there is a high possibility that the cross section will not be a clean straight line. A cutter allows you to cut in a straight line, which prevents gaps from forming between the carpet and the wall. Before cutting, mark where you want to cut with a pencil or the like.
Lay it out so there are no gaps
Carpet tileThe key is to place adjacent tiles without leaving any gaps between them. Any gaps will cause the carpet to shift or look uneven.
Also, if you notice that there is a gap when you start pasting, fix it immediately. This is because if you don't fix it early, it may continue to affect you and cause the gap to become larger.
Please keep in mind that if you lay the tiles with their corners together, you will be less likely to have gaps.
Press firmly from above
Carpet tileWhen installing, be sure to hold it firmly from above. Applying pressure will spread the adhesive evenly and hold the carpet firmly in place.
Carpet tileIt is possible to apply it DIY, but if you want to apply it more neatly, we recommend that you hire a professional to do it. Although it does cost more, hiring a contractor can reduce in-house resources, and it can be said that the quality of the carpet is higher in terms of resistance to peeling and aesthetic appearance against walls.
Recommended for commercial useCarpet tile
Carpet tileThere are various types of , and if you don't know which one to choose, Suminoe's commercialCarpet tileis recommended. Suminoe is a long-established interior manufacturer that has been involved in carpet manufacturing for over 130 years, and offers highly functional carpets in a wide variety of designs.
Here, we will introduce the work that Suminoe recommends.Carpet tileHere are three.
EX series
The EX series is an upgraded version of the conventional ECOS® series.Carpet tileIt is. ECOS® is one of Suminoe's representative products.Carpet tileare being reused.
The EX series is a product with a higher proportion of recycled materials than the ECOS® series. There are two main types.
- EX-1000 REFLECTOR: Design with a delicate light reflection motif
- EX-1100 PRISM: Design based on the refraction of light drawn by a prism
Not only is it environmentally friendly, but it is also noteworthy that it has higher light resistance, abrasion resistance, and chemical resistance than piece-dyed products.
Click here for EX series--------------
SCENERY SOUND
SCENERY SOUNDCarpet tileThis is a rectangular tile with a size of 25cm x 1m, which is rare. You can enjoy brick and ashlar designs that make use of rectangular tiles.
Of course, you can also combine it with square tiles. Since you can create designs with a variety of patterns, you will be able to create a space that suits your office interior.
Click here for SCENERY SOUND--------------
LX series
The theme is LX series "Future MODERN", and we pursued a simple yet powerful design.Carpet tileIt is. It matches a variety of materials, including modern designs and sharp plain patterns.
They are highly functional, and are easy to maintain as they are all stain- and water-repellent. Some of them are even treated with anti-virus treatment, allowing you to create an office space where you can work with peace of mind.
Click here for LX series--------------
Lay it out in a way that suits your purposeCarpet tileLet's place
Carpet tileThere are various ways of laying. Use the design patterns introduced this time as a reference and arrange them in a way that suits your company's purpose.
Carpet tileIf you are looking for Suminoe'sCarpet tilePlease consider. Suminoe is a manufacturer with a history and track record spanning over 130 years, and it decorates a variety of commercial spaces such as offices and hotels.Carpet tileWe are selling. It is also possible to request samples, so please feel free to contact us.
